Innovative Industrial TC RTD pid temperature controller with digital display

General Description

REX series PID Temperature Controller is the new product developed by
our company. It adopts special microcomputer adjusting meter that
employs switching power and surface mount technology (SMT), therefore,
the controller is quite smart and reliable. Its special functions like auto
diagnosing, auto setting and intelligent control. It can be used widely in the
display and control of the parameter of the temperature, pressure, flow, and
liquid level.

Specitications

1,Input:
Thermocouple(TC),Resistance Temperature Detect(RTD)
Standard Current and voltage signals.
2,Display:
Process Value(PV), Setting Value(SV):-1999~+1999
Output ( OUT1 ,OUT2 ) Alarm ( ALM1 ,ALM2 ) Auto setting(AT)
Display: LED
3,Control Way
(1).PID Control(including ON/OFF, position PID and continuous PID)
(2).Auto Setting Control
4.Accuracy
Measurement Accuracy:±0.5%FS
Compensation error of cold terminal: ±2℃(amend within 0~50℃ by soft)
Resolution:14bit. Samplingperiod:0.5Sec.
5.Setting Range:
Setting Value(SV): same range with PV
Proportional Band(P):0~full range(ON/OFF Control when set to 0)
IntegrationTime(I):0~3600Sec(no integral action when set to 0)
Derivative Time(D):0~3600Sec(no derivative action when set to 0)
Proportional Period:1~100Sec
On-off control output hysteretic loop width:1~100℃(or other PV units)
6.Control Output
(1)Currency output: DC 0~10Ma,4~20mA(RL<500Ω)
(2)Voltage output: DC 0-5V,1-5V(RL>10K)
(3)Relay output: Contact capacity:250V AC 3A(resistive load)
(4)Voltage Impulse output:0-12V(applicable for solid state relay SSR)
(5)Silicon Controlled Rectifier(SCR) output: zero-cross triggering or
phase-shift triggering(resistive load)
(6)Alarming function output: 2 groups output at most,12 modes
Output Contact Capacity:250V AC 3A
7.Other Parameters
(1)Insulation resistance:>50MΩ(500V DC)
(2)Insulation strength:1500V AC/min
(3)Power consumption:<10V
(4)Service environment:0~50℃,30~85RH,no corrosive gas
(5)Weight:abt.0.5Kg(C900 type)

5.First Control Output(OUT1) (Heating side)
M: Relay contact output 8:Current output(DC 4~20mA)
V: Voltage impulse output T: Hydration driving output
6.Second Control Output(OUT2) (Cooling side)
Null: when control operation is F or D
M: Relay Contact output
8: Current output( DC 4~20mA)
V: Voltage impulse output
T: Hydration driving output
7.First Alarm(ALM1) 8.Second Alarm(ALM2)
N: no alarm A: Upper-Limit bias alarm
B: Lower-Limit bias alarm C: Upper/Lower Limit bias alarm
D: Alarm in area
E: Standby upper-limit bias alarm attached
F: Standby lower-limit bias alarm attached
G: Standby upper/lower limit bias alarm attached
H: Upper-Limit input value alarm
J: Lower-limit input value alarm
K: Standby upper-limit input value alarm attached
L: Standby lower-limit input value alarm attached

Applications

Wuhan Global Metal Engineering Co., Ltd (GME) specialize in the supply of heating elements and  temperature sensors(thermocouples & RTDs) for a vast array of industries since year 1995. 

Our main products include but not limited to Coil heater, Cartridge heater, Flexible Tubular heater, Cast-in Heater, Band heater, Thermocouple, RTD’s, Thermocouple extension wire, Thermocouple connection head , Mineral Insulated thermocouple cables , thermowell, etc. 

After 20 years growth, we have more than 200 employees in the factory including 50 sophisticated technicians. Our products have been exported to many countries including North America, South America, Europe, Middle East ,South Asia, etc. 

More details, you can also visit our website: http://www.gmemetal.com